|
» Internal Hot Water Container
99,9% is from clean decaled copper or from soft steel covered with decaled copper. The extended use of copper, material which is harmless for your health, ensures a perfect operation and resistance in time. There is a optional access flange for the inside. |
|
|
|
» Heat alternator
Pipe made from copper with diameter 22 or 28mm for the circulation of thermal fluid form the boiler of the central heating or the solar system. The spiral shape reduces the friction of fluid and impedes air hemming. The hot water container can be provided with one or two alternators if needed. |
|
|
|
» Cylinder Insulation
High density Polyurethane foam with thickness up to 80mm for good heat insulation. |
|
|
|
» Collector casing
Choice of stainless steel, Aluzinc, pre-painted steel or epoxy painted galvanized steel. |
|
|
|
» Electric element
Back up source of energy, power 3KW, 240V, 50HZ, single phase electric element, with automatic thermostat and security thermostat. You can place two or more elements on the same cylinder by placing an order. |
Cylinder types
1. Low pressure
Made from copper in sizes from 15 up to 1000 litres for operation pressure 10 or 25 metres water column (test pressure 1.45 and 3.65 atmospheres).
2. Medium pressure
Made from copper in sizes from 15 up to1000 litres for operation pressure up to 6.0 bar (test pressure 9.0 bar).
3. High pressure
Made from steel and copper lined in sizes from 50 up to 5000 litres and operation pressure up to 7.0 bar (test pressure 9-13.0 bar).